TP-Link switch 8 port
TP-Link switch 8 port
Couldn't load pickup availability
TP-Link TL-SF1008D 8-Port Switch Price in Kenya | Buy in Nairobi at trewrld
At KES 2,500, the TP-Link TL-SF1008D turns one Ethernet port into eight — plug it in and it works, no configuration screens or IP addresses required. It's built for home offices, small shops, and cyber cafés around Nairobi that need more wired ports than their router provides.
- 8 x 10/100Mbps Auto-Negotiation RJ45 ports with Auto-MDI/MDIX — any standard Ethernet cable works, no crossover cables needed.
- Non-blocking switching architecture forwards traffic at full wire-speed, up to 200Mbps in full-duplex mode across all ports.
- Fanless, plastic desktop design — silent operation, ideal for a shop counter or office desk in Nairobi without a fan to wear out.
- Energy-efficient design cuts power draw by up to 60% versus standard switches — useful when you're running gear through an inverter during load-shedding.
- True plug-and-play — hakuna haja ya kupanga chochote, connect the cables and your network segment is live.
| Brand | TP-Link |
| Ports & Standards | 8 x 10/100Mbps RJ45, IEEE 802.3 / 802.3u / 802.3x |
| Performance | Non-blocking switching, up to 200Mbps full-duplex, 2K Jumbo frame support |
| Key Feature 1 | Auto-MDI/MDIX on every port — no crossover cables needed |
| Key Feature 2 | Fanless, energy-efficient design (up to 60% less power draw) |
| Compatibility | Works with any standard Cat5/5e/6 Ethernet cable, plug-and-play, no software |
| Price in KES | 2,500 |
| Warranty | Contact us on 0722 700 018 for current warranty terms |
Whether you're wiring up a cyber café in town, adding extra ports to a small office network, or connecting multiple desktops in a shop with only one wall socket, the TL-SF1008D expands your wired network without any setup. It's a simple fix for the common problem of more devices than router ports — no technician visit required, and its low power draw makes it easy to keep running on an inverter or UPS during outages.
Who It's Ideal For
- Small offices, shops, and cyber cafés that need more wired Ethernet ports than their router provides
- Anyone setting up a reliable wired connection for desktops, printers, or CCTV DVRs
- Budget-conscious buyers who just need basic port expansion with zero configuration
Who Should Consider Something Else
- Anyone needing Gigabit speeds for large file transfers between computers — look for a Gigabit-rated desktop switch instead
- Networks that need VLANs, port management, or traffic prioritization — this is an unmanaged switch by design
Pros
- Genuinely plug-and-play, no app or web interface needed
- Fanless and silent
- Solid, well-known TP-Link build quality at an entry price
- Auto-MDI/MDIX means any cable works
Cons
- 10/100Mbps only — not Gigabit
- No management features (VLAN, QoS, port monitoring)
- No PoE — won't power PoE cameras or access points
For most home and small-office setups, the TL-SF1008D's 100Mbps ports are plenty for internet sharing, printing, and basic file access. If you're moving large files between computers or running a NAS, a Gigabit-rated switch is worth the step up. If it's Wi-Fi coverage rather than wired ports you need to expand, trewrld's TP-Link TL-R470T+ Desktop Load Balance Broadband Router (KES 6,000) is a natural companion for combining multiple internet lines onto the same network this switch feeds.
"All my tech requirements are usually handled by them. Very professional and top notch services." — Victor Oyugi, Google review
Verdict: At KES 2,500, the TL-SF1008D is the straightforward answer for an office or shop that's run out of Ethernet ports — plug it in and it just works. Stick with it for basic wired expansion; step up to a Gigabit or managed switch only if you need faster transfer speeds or network control features.
Do I need to configure the TP-Link TL-SF1008D before use?
No — it's a plug-and-play unmanaged switch. Connect your Ethernet cables and the ports are active immediately, with no software or web login required.
Can I use any Ethernet cable with this switch?
Yes. Every port supports Auto-MDI/MDIX, so standard straight-through Cat5/5e/6 cables work without needing a special crossover cable.
Does the TL-SF1008D support Gigabit speeds?
No — it runs at 10/100Mbps per port. If you need Gigabit speeds for large file transfers, ask trewrld about Gigabit-rated switch options.
trewrld | Queensway House, Kaunda Street, 2nd Floor Room 13, Nairobi | 0722 700 018 | @trewrldke
M-Pesa, Visa/Mastercard & Bank Transfer accepted | Same-day delivery in Nairobi, 1–4 days countrywide, and delivery across East Africa (Uganda, Tanzania, Rwanda, Burundi, South Sudan)
Share
